Publicaciones de los miembros del grupo

A continuación se presentan los artículos científicos publicados por alguno de los miembros del Grupo.

Dynamic tensile necking: Influence of specimen geometry and boundary conditions

S. Osovski, D. Rittel, J.A. Rodríguez-Martínez, R. Zaera

Mechanics of Materials, Volume 62, 1 August 2013, Pages 1-13

 

On the complete extinction of selected imperfection wavelengths in dynamically expanded ductile rings

J.A. Rodríguez-Martínez, G. Vadillo, R. Zaera, J. Fernández-Sáez

Mechanics of Materials, Volume 60, July 2013, Pages 107-120

 

Identification of the critical wavelength responsible for the fragmentation of ductile rings expanding at very high strain rates

J.A. Rodríguez-Martínez, G. Vadillo, J. Fernández-Sáez, A. Molinari

Journal of the Mechanics and Physics of Solids, Volume 61, Issue 6, June 2013, Pages 1357-1376

Finite element analysis of AISI 304 steel sheets subjected to dynamic tension: The effects of martensitic transformation and plastic strain development on flow localization

J.A. Rodríguez-Martínez, D. Rittel, R. Zaera, S. Osovski

International Journal of Impact Engineering, Volume 54, April 2013, Pages 206-216

Experimental and numerical analysis of the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles

J.A. Rodríguez-Martínez, A. Rusinek, R. Pesci, R. Zaera

International Journal of Solids and Structures, Volume 50, Issue 2, 15 January 2013, Pages 339-351

On the Taylor–Quinney coefficient in dynamically phase transforming materials. Application to 304 stainless steel

R. Zaera, J.A. Rodríguez-Martínez, D. Rittel

International Journal of Plasticity, Volume 40, January 2013, Pages 185-201

Numerical analysis of high velocity impacts on unidirectional laminates

J. Pernas-Sánchez, J.A. Artero-Guerrero, J. Zahr Viñuela, D. Varas, J. López-Puente

Composite Structures, Available online 4 September 2013, ISSN 0263-8223

On the influence of filling level in CFRP aircraft fuel tank subjected to high velocity impacts

J.A. Artero-Guerrero, J. Pernas-Sánchez, J. López-Puente, D. Varas

Composite Structures, In Press, Accepted Manuscript, Available online 4 September 2013

Axisymmetric free vibration of closed thin spherical nano-shell

R. Zaera, J. Fernández-Sáez, J.A. Loya

Composite Structures, 2013, 104, 154-161

Optimization of passive vibration absorbers to reduce chatter in boring

L. Rubio, J.A.Loya, M.H.Miguélez, J.Fernández-Sáez

Mechanical System and Signal Processing (2013), Available online 22 August 2013

On the use of variable-separation method for the analysis of vibration problems with time-dependent boundary conditions

ARANDA, J.; FERNANDEZ-SAEZ, J.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol 226, 2012, pp 2912-2924

Bending vibrations of rotating nonuniform nanocantilevers using the Eringen nonlocal elasticity theory

ARANDA, J.; LOYA, J. A. ; FERNANDEZ-SAEZ, J.

Composite Structures, Vol. 94, Núm. 9, 2012, pp. 2990-3001

Vibrations in Euler-Bernoulli beams treated with non-local damping patches

GONZALEZ-LOPEZ, S.; FERNANDEZ-SAEZ, J.

Computers and Structures, Vol. 108, 2012, pp. 125-134

Compressive Viscoplastic Response of 6082-T6 and 7075-T6 Aluminium Alloys Under Wide Range of Strain Rate at Room Temperature: Experiments and Modelling

MOCKO, W.; KOWALEWSKI, Z.L.; RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.

Strain, Vol. 48, 2012, pp. 498-509

Temperature increase associated with plastic deformation under dynamic compression: application to aluminium alloy al 6082

PEREZ-CASTELLANOS, J. L. ; RUSINEK, A.

Journal of Theoretical and Applied Mechanics, Vol. 50, Núm. 2, 2012, pp. 377-398

Numerical modeling of ice behavior under high velocity impacts

PERNAS, J.; PEDROCHE, D.; LÓPEZ-PUENTE, J. ; ZAERA, R.

International Journal of Solids and Structures, Vol. 49, Núm. 14, 2012, pp. 1919-1927

A new efficient procedure to solve the nonlinear dynamics of a cracked rotor

RUBIO, L. ; FERNANDEZ-SAEZ, J.

Nonlinear dynamics, Vol. 70, 2012, pp. 1731-1745

First order solutions for the buckling loads of weakened Timoshenko columns

VADILLO, G. ; LOYA, J. A. ; FERNANDEZ-SAEZ, J.

Computers and mathematics with applications, Vol. 64, 2012, pp. 2395-2407

On the interplay between strain rate and strain rate sensitivity on flow localization in the dynamic expansion of ductile rings

VADILLO, G. ; RODRÍGUEZ-MARTÍNEZ, J.A.; FERNANDEZ-SAEZ, J.

International Journal of Solids and Structures, Vol. 49, Núm. 03-abr, 2012, pp. 481-491

Numerical Analysis of the Hydrodynamic Ram Phenomenon in Aircraft Fuel Tanks

VARAS, D. ; LÓPEZ-PUENTE, J. ; ZAERA, R.

AIAA journal , Vol. 50, Núm. 7, 2012, pp. 1621-1630

Numerical modelling of partially filled aircraft fuel tanks submitted to Hydrodynamic Ram

VARAS, D. ; ZAERA, R.; LÓPEZ-PUENTE, J.

Aerospace Science and Technology, Vol. 16, Núm. 1, 2012, pp. 19-28

A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates

ZAERA, R.; RODRÍGUEZ-MARTÍNEZ, J.A.; CASADO, A.; FERNANDEZ-SAEZ, J. ; RUSINEK, A.; PESCI, R.

International Journal of Plasticity, Vol. 29, 2012, pp. 77-101

A constitutive equation for ceramic materials used in lightweight armors

FERNÁNDEZ-FDZ, D. ; ZAERA, R.; FERNANDEZ-SAEZ, J.

Computers and Structures, Vol. 89, Núm. 23-24, 2011, pp. 2316-2324

 

Influence of t33 stress on the 3-D stress state around corner cracks in an elastic plate

FERNANDEZ-SAEZ, J. ; FERNANDEZ, A.; GINER, E.; GONZÁLEZ-ALBUIXECH, V.

Engineering Fracture Mechanics, Vol. 78, Núm. 2, 2011, pp. 412-427

Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers

GARCIA, P.A.; VERA, M.; ZAERA, R.

International Journal of Hydrogen Energy, Vol. 36, Núm. 18, 2011, pp. 18856-18870

 

Elastic constants and isotropy considerations for particulate metal-matrix composites. A multi-particle cell-based approach

PEREZ-CASTELLANOS, J. L. ; ZAHR, J.

Composites. Part A, Applied science and manufacturing, Vol. 42, Núm. 5, 2011, pp. 521-533

Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature

RODRÍGUEZ-MARTÍNEZ, J.A.; PESCI, R.; RUSINEK, A.

Materials science and engineering.A, Structural materials: properties, microstructure and processing, Vol. 528, Núm. 18, 2011, pp. 5974-5982

 

A dislocation-based constitutive description for modeling the behavior of FCC metals within wide ranges of strain rate and temperature

RODRÍGUEZ-MARTÍNEZ, J.A.; RODRIGUEZ-MILLAN, M.; RUSINEK, A.; ARIAS, A.

Mechanics of materials, Vol. 43, Núm. 12, 2011, pp. 901-91

Thermo-viscoplastic behaviour of 2024-T3 aluminium sheets subjected to low velocity perforation at different temperatures

RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.; ARIAS, A.

Thin-walled structures, Vol. 49, Núm. 7, 2011, pp. 819-832

 

 

Numerical Modeling of Post-Processing of Composite Materials

SOLDANI, X.; SANTIUSTE, C. ; LOYA, J. A. ; MIGUELEZ, M.H.

Materials Science Forum , Vol. 692, 2011, pp. 93-98

Some applications of Burzynski yield condition in metal plasticity

VADILLO, G. ; FERNANDEZ-SAEZ, J. ; PECHERSKI, R.B.

Materials and design, Vol. 32, Núm. 2, 2011, pp. 628-635

 

 

Experimental study of CFRP fluid-filled tubes subjected to high-velocity impact

VARAS, D. ; ZAERA, R.; LÓPEZ-PUENTE, J.

Composite Structures, Vol. 93, Núm. 10, 2011, pp. 2598-2609

FE analysis on the formation of plastic instabilities in dynamically expanded copper rings

VELA, C.; RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.

Engineering Transactions , Vol. 59-3, 2011, pp. 211-233

On the path and area Jx1-integral components and their relationship to the out-of-plane constraint in elastic cracked plates

FERNANDEZ-CANTELI, A.; GINER, E.; FERNANDEZ-ZUÑIGA, D.; FERNANDEZ-SAEZ, J.

Key engineering materials, Vol. 417-418, 2010, pp. 421-424

 

On the Jx1-integral and the out-of-plane constraint in a 3D elastic cracked plate loaded in tension

GINER, E.; FERNANDEZ-ZUÑIGA, D.; FERNANDEZ-SAEZ, J. ; FERNANDEZ-CANTELI, A.

International Journal of Solids and Structures, Vol. 47, 2010, pp. 934-946

Determination of the Constitutive Relation Parameters of a Metallic Material by Measurement of Temperature Increment in Compressive Dynamic Tests

GUZMÁN-LÓPEZ, R; ZAHR, J.A.; PEREZ-CASTELLANOS, J. L. ; MELENDEZ, J.

Experimental mechanics, Vol. 50, Núm. 3, 2010, pp. 389-397

First-Order Solutions for the Buckling Loads of Euler-Bernoulli Weakened Columns

LOYA, J. A. ; VADILLO, G. ; FERNANDEZ-SAEZ, J.

JOURNAL OF ENGINEERING MECHANICS-ASCE, Vol. 136, Núm. 5, 2010, pp. 674-679

Crack-front propagation during three-point-bending tests of polymethyl-methacrylate beams

LOYA, J. A. ; VILLA, E.I.; FERNANDEZ-SAEZ, J.

Polymer Testing, Vol. 29, Núm. 1, 2010, pp. 113-118

Improvement of chatter stability in boring operations with passive vibration absorbers

MIGUELEZ, M. H. ; RUBIO, L. ; LOYA, J. A. ; FERNANDEZ-SAEZ, J.

International Journal of Mechanical Sciences, Vol. 52, Núm. 10, 2010, pp. 1376-1384

Temperature increment during quasi-static compression tests using Mg metallic alloys

PEREZ-CASTELLANOS, J. L. ; GUZMÁN-LÓPEZ, R; RUSINEK, A.; MELENDEZ, J.

Materials & Design, Vol. 31, Núm. 7, 2010, pp. 3259-3269

Thermo-mechanical behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles at different temperatures

RODRÍGUEZ-MARTÍNEZ, J.A.; PESCI, R.; RUSINEK, A.; ARIAS, A. ; ZAERA, R.; ARIAS, D.

International Journal of Solids and Structures, Vol. 47, Núm. 9, 2010, pp. 1268-1284

Temperature measurements on ES steel sheets subjected to perforation by hemispherical projectiles

RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.; CHEVRIER, P.; BERNIER, R.; ARIAS, A.

International -Journal of Impact Engineering, Vol. 37, Núm. 7, 2010, pp. 828-841

Experimental survey on the behaviour of AISI 304 steel sheets subjected to perforation

RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.; PESCI, R.

Thin-walled Structures, Vol. 48, Núm. 12, 2010, pp. 966-978

A Note on the Use of Approximate Solutions for the Bending Vibrations of Simply Supported Cracked Beams

RUBIO, L.; FERNANDEZ-SAEZ, J.

Journal of Vibration and Acoustics, Vol. 132, Núm. 2, 2010

A thermo-viscoplastic constitutive model for FCC metals with application to OFHC copper

RUSINEK, A.; RODRÍGUEZ-MARTÍNEZ, J.A.; ARIAS, A.

International Journal of Mechanical Sciences, Vol. 52, Núm. 2, 2010, pp. 120-135

Experimental characterisation and modelling of the thermo-viscoplastic behaviour of steel aisi 304 within wide ranges of strain rate at room temperature

RUSINEK, A.; RODRÍGUEZ-MARTÍNEZ, J.A.; PESCI, R.; CAPELLE, J.

Journal of Theoretical and Applied Mechanics, Vol. 48, Núm. 4, 2010, pp. 1027-1042

An analysis of Gurson model with parameters dependent on triaxiality based on unitary cells

FERNANDEZ-SAEZ, J. ; VADILLO, G.

European Journal Of Mechanics - A/Solids , Núm. 28, 2009, pp. 417-427

 

Relationship between Mesostructure, Mechanical Behaviour and Damage of Cement Composites Under High-Pressure Confinement

FORQUIN, P.; ARIAS, A. ; ZAERA, R.

Experimental mechanics, Vol. 49, Núm. 5, 2009, pp. 613-625

  

Impact behaviour of preloaded glass/polyester woven plates

GARCIA-CASTILLO, S.K.; SÁNCHEZ-SÁEZ, S. ; LÓPEZ-PUENTE, J. ; BARBERO, E. ; NAVARRO, C.

Composites science and technology, Vol. 69, Núm. 6, 2009, pp. 711-717

 

Measurement of temperature increment in compressive guasi-static and dynamic test usin infrared thermography

GUZMAN, R.E.; MELENDEZ, J. ; ARANDA, J. M. ; ESSIA, Y.; LOPEZ, F. ; PEREZ, J. L.

Strain , Vol. 45, 2009, pp. 179-189

Determination of the Constitutive Relation Parameters of a Metallic Material by Measurement of Temperature Increment in Compressive Dynamic Test

GUZMAN, R.E.; PEREZ, J.L.; MELÉNDEZ, J.; ZAHR, J.

Experimental mechanics, 2009

 

Modelling of thermoviscoplastic behavior of DH36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems
 

KLEPACZKO, J.R.; RUSINEK, A.; RODRÍGUEZ-MARTÍNEZ, J.A.; PECHERSKI, R.; ARIAS, A.

Mechanics of Materials, Vol. 41, Núm. 5, 2009, pp. 599-621

Analytical modelling of high velocity impacts of cylindrical projectiles on carbon/epoxy laminates

LÓPEZ-PUENTE, J. ; VARAS, D. ; LOYA, J. A. ; ZAERA, R.

Composites. Part A, Applied science and manufacturing, Vol. 40, Núm. 8, 2009, pp. 1223-1230

 

Free transverse vibrations of cracked nanobeams using a nonlocal elasticity model

LOYA, J. A. ; LÓPEZ-PUENTE, J. ; ZAERA, R.; FERNANDEZ-SAEZ, J.

Journal of Applied Physics, Vol. 105, 2009, pp. 44309

An efficient implementation of boundary conditions in an ale model for orthogonal cutting

MIGUELEZ, M. H. ; MUÑOZ, A. ; CANTERO, J. L. ; LOYA, J. A.

Journal Of Theoretical And Applied Mechanics, Vol. 47, Núm. 3, 2009, pp. 599-616

 

Residual Stresses in Orthogonal Cutting of Metals: The Effect of Thermomechanical Coupling Parameters and of Friction

MIGUELEZ, M. H. ; ZAERA, R.; MOLINARI, A; CHERIGUENE, R.; RUSINEK, A.

Journal of Thermal Stresses, Vol. 32, Núm. 3, 2009, pp. 269-289.

Relation between strain hardening of steel and critical impact velocity in tension

RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.; ARIAS, A.

Journal of Theoretical And Applied Mechanics, Vol. 47, Núm. 3, 2009, pp. 645-665

 

Constitutive Relation for Steels Approximating Quasi-Static and Intermediate Strain Rates at Large Deformations

RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.; KLEPACZKO, J.

Mechanics research communications, Vol. 36, Núm. 4, 2009, pp. 419-427

Extension of R-K constitutive relation to phase transformation phenomena

RODRÍGUEZ-MARTÍNEZ, J.A.; RUSINEK, A.; PECHERSKI, R.B.; KLEPACZKO, J.R.

Materials & Design, Vol. 30, Núm. 7, 2009, pp. 2513-2520

 

Thermo-viscoplastic constitutive relation for aluminium alloys, modelling of negative strain rate sensitivity and viscous drag effects

RUSINEK, A.; RODRÍGUEZ-MARTÍNEZ, J.A.

Materials & Design, Vol. 36, 2009, pp. 4377-4390

Analysis of Thermo-Visco-Plastic Behaviour of Six High Strength Steels

RUSINEK, A.; RODRÍGUEZ-MARTÍNEZ, J.A.; PĘCHERSKI, R.B.; KLEPACZKO, J.R.

Materials & Design, Vol. 30, Núm. 5, 2009, pp. 1748-1761

 

Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles
 

RUSINEK, A.; RODRÍGUEZ-MARTÍNEZ, J.A.; ZAERA, R.; KLEPACZKO, J.R.; ARIAS, A. ; SAUVELET, C.

International Journal of Impact Engineering, Vol. 36, Núm. 4, 2009, pp. 565-587

Simplified longitudinal seismic response of tunnels linings subjected to surface waves

SÁNCHEZ-MERINO, A.L.; FERNANDEZ-SAEZ, J. ; NAVARRO, C.

Soil Dynamics And Earthquake Engineering, Vol. 29, Núm. 3, 2009, pp. 579-582

 

Experimental analysis of fluid-filled aluminium tubes subjected to high-velocity impact

VARAS, D. ; LÓPEZ-PUENTE, J. ; ZAERA, R.

International Journal Of Impact Engineering, Vol. 36, Núm. 1, 2009, pp. 81-91

Numerical modelling of the hydrodynamic ram phenomenon

VARAS, D. ; ZAERA, R.; LÓPEZ-PUENTE, J.

International Journal Of Impact Engineering, Vol. 36, Núm. 3, 2009, pp. 363-374

A new tool based on artificial neural networks for the design of lightweight ceramic-metal armour against high-velocity impact of solids

FERNÁNDEZ-FDZ, D. ; ZAERA, R.

International Journal of Solids and Structures, Vol. 45, Núm. 25-26, 2008, pp. 6369-6383

Prediction of the behaviour of CFRPs against high-velocity impact of solids employing an artificial neural network methodology

FERNÁNDEZ-FDZ, D. ; LÓPEZ-PUENTE, J. ; ZAERA, R.

Composites Part A: Applied Science and Manufacturing, Vol. 39, Núm. 6, 2008, pp. 989-996

Role of porosity in controlling the mechanical and impact behaviours of cement-based materials

FORQUIN, P.; ARIAS, A. ; ZAERA, R.

International Journal of Impact Engineering, Vol. 3, Núm. 35, 2008, pp. 133-146

Measurement of temperature increment in compressive quasi-static and dynamic tests using the infrared thermography

GUZMÁN, R.; EL-SAEID, Y. ; MELENDEZ, J. ; ARANDA, J. M. ; LÓPEZ, F.; PEREZ, J. L.

DOI: 10.1111/j.1475-1305.2007.00384.x, 2008

Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates

LÓPEZ-PUENTE, J. ; ZAERA, R.; NAVARRO, C.

Composites Part A: Applied Science and Manufacturing, Vol. 39, Núm. 2, 2008, pp. 374-387.

Three-dimensional effects on the dynamic fracture determination of Al 7075-T651 using TPB specimens

LOYA, J. A. ; FERNANDEZ-SAEZ, J.

International Journal of Solids and Structures, Vol. 45, Núm. 07, 2008, pp. 2203-2219

Influence of conical projectile diameter on perpendicular impact of thin steel plate

RUSINEK, A.; RODRIGUEZ, J.A.; ARIAS, A. ; KLEPACZKO, J.R.; LÓPEZ-PUENTE, J.

Engineering Fracture Mechanics, Vol. 75, Núm. 10, 2008, pp. 2946-2967

Effect of plastic deformation and boundary conditions combined with elastic wave propagation on the collapse site of a crash box

RUSINEK, A.; ZAERA, R.; FORQUIN, P.; KLEPACZKO, J.R.

Thin-Walled Structures, Vol. 46, 2008, pp. 1143-1163

Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impacts

SANCHEZ, S. ; BARBERO, E. ; NAVARRO, C.

Composite Structures, Vol. 85, Núm. 3, 2008, pp. 226-232

Dynamic analysis of bending-torsion coupled composite beams using the Flexibility Influence Function Method

SANTIUSTE, C. ; SANCHEZ, S. ; BARBERO, E.

International Journal of Mechanical Sciences, Vol. 50, Núm. 12, 2008, pp. 1611-1618

Consistent integration of the constitutive equations of Gurson materials under adiabatic conditions

VADILLO, G. ; ZAERA, R.; FERNANDEZ-SAEZ, J.

Computer Methods in Applied Mechanics and Engineering, Vol. 197, Núm. 13-16, 2008, pp. 1280-1295

Relationship between static bending and compressive behaviour of particle reinforced cement composites

ZAERA, R.; NAVARRO, C. ; FORQUIN, P.; ARIAS, A.

Composites Part B: Engineering, Vol. 39, Núm. 07-AGO, 2008, pp. 1205-1215

Estudio experimental de mecanismos de fallo en placas de acero sometidas a impacto de proyectiles cilíndricos, cónicos y hemisféricos

ARIAS, A. ; RUSINEK, A.; KLEPACZKO, J.R.; ZAERA, R.; RODRIGUEZ, J.A.; FERNANDEZ-SAEZ J.

Anales de Mecánica de la Fractura, Vol. 1, Núm. 25, 2008, pp. 217-222

Sobre la tensión T y su relación con el análisis de la pérdida de constricción

FERNÁNDEZ ZÚÑIGA, D.; FERNANDEZ-SAEZ, J. ; FERNANDEZ CANTELI, A.

Anales de Mecánica de la Fractura, Vol. 25, 2008, pp. 522-529

Incremento térmico asociado a la deformación plástica en ensayos de compresión de probetas metálicas

GUZMAN, R.E.; PEREZ, J. L.

Anales de Mecánica de la Fractura, Vol. 25, 2008

Mecanismos de fallo en placas de acero sometidas a impacto de proyectiles cilíndricos, cónicos y hemisféricos

RODRIGUEZ, J.A.; RUSINEK, A.; ARIAS, A. ; KLEPAZCKO, J.R.; FERNANDEZ-SAEZ, J.

Anales de Mecánica de la Fractura, Vol. 1, Núm. 25, 2008, pp. 217-222

Numerical simulations of impact behaviour of thin steel plates subjected to cylindrical, conical and hemispherical non-deformable projectiles

ARIAS, A. ; RODRIGUEZ, J.A.; RUSINEK, A.

Engineering Fracture Mechanics, Vol. 75, Núm. 6, 2007, pp. 1635-1656

An experimental method of measuring the confined compression strength of geomaterials

ARIAS, A. ; ZAERA, R.; FORQUIN, P.

International Journal of Solids and Structures, Vol. 13, Núm. 44, 2007, pp. 4291-4317

Numerical simulation and experimental study of a mechanism for Hopkinson bar test

EL-SAEID, Y. ; LÓPEZ-PUENTE, J. ; PEREZ, J. L.

Journal of Strain Analysis for Engineering Design, Vol. 3, Núm. 42, 2007, pp. 163-172

Prediction of the response under impact of steel armours using a multilayer perceptron

GARCIA, A. ; RUIZ, M. B. ; FERNÁNDEZ-FDZ, D. ; ZAERA, R.

Neural Computing & Applications, Vol. 16, Núm. 2, 2007, pp. 147-154

An analytical model for high velocity impacts on thin CFRPs woven laminated plates

LÓPEZ-PUENTE, J. ; ZAERA, R.; NAVARRO, C.

International Journal of Solids and Structures, Núm. 44, 2007, pp. 2837-2851

Dynamic fracture-initiation toughness determination of Al 7075-T651 aluminum alloy

LOYA, J. A. ; FERNANDEZ-SAEZ, J.

Journal of Testing and Evaluation, Vol. 35, Núm. 25, 2007, pp. 25-30

Finite element simulation of steel ring fragmentation under radial expansion

RUSINEK, A.; ZAERA, R.

International Journal of Impact Engineering, Vol. 34, Núm. 4, 2007, pp. 799-822

Constitutive relations in 3-D for a wide range of strain rates and temperatures - Application to mild steels

RUSINEK, A.; ZAERA, R.; KLEPACZKO, J.R.

International Journal of Solids and Structures, Vol. 44, Núm. 17, 2007, pp. 5611-5634

Cost-effective optoelectronic system to measure the projectile velocity in high-velocity impact testing of aircraft and spacecraft structural elements

SANCHEZ, J. M. ; MARCOS, C.; FERNANDEZ, M.Y.; ZAERA, R.

Optical Engineering, Vol. 46, Núm. 5, 2007, pp. 510141-510146

Analysis of the dynamic flexural behaviour of composite beams at low temperature

SANCHEZ, S. ; BARBERO, E. ; NAVARRO, C.

Composites Science and Technology, Núm. 11-12, 2007, pp. 2616-2632

Influence of porosity on cavitation instability predictions for elastic-plastic solids

TVERGAARD, V.; VADILLO, G.

International Journal of Mechanical Sciences, Vol. 49, 2007, pp. 210-216

Residual stresses in ceramic-to-metal joints: Diffraction measurements and finite element method analysis

VILA, M.; PRIETO, C.; ZAHR, J.A.; PEREZ, J. L. ; BRUNO, G.; JIMENEZ RUIZ, M.; MIRANZO, P.; OSENDI, M.I.

Philosophical Magazine A, Vol. 87, Núm. 35, 2007, pp. 5551-5563

General expressions for the stress intensity factor of a one-point bend beam

VILLA, E.I.; LOYA, J. A. ; FERNANDEZ-SAEZ, J.

Engineering Fracture Mechanics, Vol. 74, 2007, pp. 373-385

Sobre la integral J en situaciones de constricción lateral

FERNANDEZ ZUÑIGA, D.; LOYA, J. A. ; FERNANDEZ-SAEZ, J. ; FERNANDEZ CANTELI, A.

Anales de Mecánica de la Fractura, Vol. 24, 2007, pp. 405-410

Modelo multipartícula aplicable al análisis del comportamiento mecánico de materiales compuestos reforzados con partículas

ZAHR, J.A.; PEREZ, J. L.

Anales de Mecánica de la Fractura, Vol. 24, Núm. XXIV, 2007, pp. 482-488

Determination of the dynamic stress intensity factor of a specimen under one-point bending from the measurement of the load-point displacement

VILLA, E. I.; LOYA, J. A.; FERNANDEZ-SAEZ, J.; NAVARRO, C.

Journal de physique IV, Vol. 134, 2006, pp. 827-832

An experimental method of measuring the confined compression strength of high-performance concretes to analyse their ballistic behaviour

FORQUIN, P.; ARIAS, A.; ZAERA, R. E.

Journal de physique IV, 2006, pp. 629-634

Natural frequencies for bending vibrations of Timoshenko cracked beams

LOYA, J. A.; RUBIO, M. L.; FERNANDEZ-SAEZ, J.

Journal of Sound and Vibration, 2006, pp. 640-653

 

Numerical modelling of orthogonal cutting: influence of cutting conditions and separation criterion

MIGUELEZ, M. H.; ZAERA, R. E. ; MOLINARI, A.; MOUFKI, A.; RUSINEK, A.

Journal de Physique IV, 2006, pp. 417-422

Measurement of Temperature Increment in Compressive Quasi-static and Dynamic Tests using the Infrared Thermography

GUZMAN R. E.; EL-SAEID, Y.; ARANDA, J. M.; MELENDEZ, J.; LOPEZ, F.; PEREZ, J. L.

Strain, 2006, Vol. 45, Núm 2, pp. 179-189

 

Response of pre-loaded laminate composite plates subject to high velocity impact

GARCIA-CASTILLO, S. K.; SANCHEZ, S.; BARBERO, E.; NAVARRO, C.

Journal de Physique IV, 2006, pp. 1257-1263

An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations

ZAERA, R. E.; FERNANDEZ-SAEZ, J.

International Journal of Solids and Structures, Vol. 43, 2006, pp. 1594-1612

 

Propagación de fisuras en ensayos de flexión en tres puntos en PMMA

VILLA E. I.; LOYA, J. A.; FERNANDEZ-SAEZ, J.

Anales de Mecánica de la Fractura, Vol.23, 2006, pp. 497-502

Análisis numérico de fractura dinámica en polímeros frágiles

LOYA, J. A.; RAVI-CHANDAR, K.

Anales de Mecánica de la Fractura, 2006, pp. 195-200

 

Métodos computacionales aplicados a la predicción de resistencia residual de paneles de ala o fuselaje

MARTIN, F.; MIRON, E.; SANTOS, S.; FERNANDEZ-SAEZ, J.

Anales de Mecánica de la Fractura, Vol. 23, 2006, pp. 293-304

Estudio preliminar del modelo de Gurson con parámetros dependientes de la triaxialidad

VADILLO, G.; FERNANDEZ-SAEZ, J.

Anales de Mecánica de la Fractura, Vol.23, 2006, pp. 201-206

The ballistic behavior of mortars reinforced with ceramic particles: influence of reinforcement

ARIAS, A.; ZAERA, R. E.; FORQUIN, P.

Structural Dynamics Eurodyn, Vol. 2005, 2005, pp. 1173-1178

 

Dynamic tensile behaviour at low temperature of CFRP using a Split Hopkinson Bar

GOMEZ DEL RIO, T.; BARBERO, E.; ZAERA, R. E.; NAVARRO, C.

Composites Science and Technology, Vol. 1, 2005, pp. 61-71

Damage in CFRPs due to low velocity impact at low temperature

GOMEZ DEL RIO, T.; ZAERA, R. E.; BARBERO, E.; NAVARRO, C.

Composites Part B: Engineering, Vol. 1, 2005, pp. 41-50

 

The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study

LÓPEZ-PUENTE, J.; ARIAS, A.; ZAERA, R. E.; NAVARRO, C.

International Journal of Impact Engineering, 2005, pp. 321-336

Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel

RUSINEK, A.; ZAERA, R. E.; KLEPACZKO, J.; CHERIGUENE, R.

Acta Materialia, 2005, pp. 5387-5400

 

Compression after impact of thin composite laminates

SANCHEZ, S.; BARBERO, E.; ZAERA, R. E.; NAVARRO, C.

Composites Science and Technology, Vol. 13, 2005, pp. 1911-1919

Measurements and Finite Element Simulations of Residual Stresses developed Si3N4/Ni Diffusion Bonds

VILA, M.; PRIETO, C.; MIRANZO, P.; OSENDI, M.I.; DEL RÍO, J.M.; PEREZ, J. L.

Journal of American Ceramic Society, 2005, pp. 2515-2520

 

Expresión general del FIT y del CMOD en probetas de flexión en un punto

VILLA E. I.; LOYA, J. A.; FERNANDEZ-SAEZ, J.

Anales de Mecánica de la Fractura, 2005, pp. 75-80

Influencia de las tensiones de cortadura interlaminar en el ensayo de flexión en tres puntos

SANTIUSTE, C.; SANCHEZ, S.; BARBERO, E.; NAVARRO, C.

Actas del VI Congreso Nacional de Materiales Compuestos, 2005, pp. 651-658